Âm ly đèn | Danh mục sản phẩm | Cường.Audio Online Store

Liên hệ

Octave V40SE Line
Liên hệ

The V 40 SE is a line level integrated amplifier with 2 x 40 W peak output power. He is a further development and direct descendant of the successful V 40 and V 50 amplifier models. His powerful, clear bass fundamentals and his captivating resolution in the high frequencies win much respect. His unique features lift the V 40 SE into the 21st Century, while his performance earned him the rare “Stereoplay Highlight” (issue 07-2009), a prestigious award bestowed by the German high-end audio magazine Stereoplay.

—————————————

Giá cuong.audio: 4,700 USD

Thêm vào giỏ hàng
Liên hệ

Octave V70SE Line
Liên hệ

The V 70 SE is a line level integrated amplifier delivering 2 x 70 W peak output power. Belonging to the same family of design as the V 40 SE, the V 70 SE performs with more power. His outstanding features are control and dynamics. The V 70 SE plays Rock-and-Roll like Rock-and- Roll and celebrates Classical music with delicate grace and solid expanse. Listening to music becomes an absolute pleasure.

—————————————

Giá cuong.audio: 6,300 USD

Thêm vào giỏ hàng
Liên hệ

Octave V110SE Line
Liên hệ

The Octave V 110 integrated amplifier is a push-pull pentode design delivering 2 x 110 W RMS output power (into 4 ohm loads). As with all Octave models, all research and development (R&D) and production has been conducted exclusively in-house, and the amplifier is comprehensively safeguarded against user error and parts wear – including catastrophic power tube failure.

—————————————

Giá cuong.audio: 7,900 USD

Thêm vào giỏ hàng
Liên hệ

Octave V80SE Line
Liên hệ

The all-new OCTAVE V 80 SE sets new benchmarks for quality and performance in the product category of integrated amplifiers. He is the crown of the Octave integrated amplifier range and shines with a completely new amplifier design. A new driver stage, upgraded output transformers, and a more sophisticated power transformer highlight the technical design, while a completely new feedback loop offers absolute stability. As a serious alternative to high end separate pre- and power-amplifier components, the V 80 SE is equipped with a wide variety of inputs, both RCA and XLR, and features full function preamp capabilities. A MM or MC phono board is optional. A connection for Octave’s proprietary Black Box or Super Black Box power supply capacitance upgrade module is also included.

—————————————

Giá cuong.audio: 10,350 USD

Thêm vào giỏ hàng
-30%
6,055 ₫

HP 300 SE
6,055 ₫

Der OCTAVE HP 300 SE ist eine Weiterentwicklung des legendären HP 300 MK2. Er erweitert die OCTAVE Vorverstärker-Palette vor allem durch die große Vielfalt an Anschlüssen. Weiter bietet der HP 300 SE durch Verbesserungen im Netzteil und der Ausgangsstufe des Line-Verstärkers eine herausragende Klangqualität. Die neu entwickelte Line Stufe verfügt über einen extrem hohen Rauschabstand.

—————————————

Thêm vào giỏ hàng
9,300 ₫

Octave HP 500 SE
9,300 ₫

The HP 500 has accompanied almost the entire OCTAVE story and thus shaped our company philosophy. For over 15 years, this preamp has stood for high sound consistency and state-of-the-art tube technology, whose top position would never have been possible without regular updates over such a long period of time—————————————

Giá cuong.audio: 9,300 USD

Thêm vào giỏ hàng

Octave RE 320

Liên hệ

Basic Model		Power Amplifier 2 x 130 Watt RMS
Tube Complement		KT 150, Driver Stage: 3 x ECC 82
Design		Aluminium silver or Aluminium black
Add On Modules		Black-Box and Super Black Box

Specifications

Output Power into 4 ohms

Power Selector High: 2 x 130 W RMS

Power Selector Low: 2 x 75 W RMS

Peak Power into 4 ohms

Power Selector High: 200 W one channel
2 x 150 W both channels

Power Selector Low: 140 W one channel

Into 8-Ohms Load the Output Power
is reduced by 20%

Power Bandwith

25 Hz – 85 kHz / – 3dB at Full Power

5 Hz – 85 kHz / -3dB at 5 W

Noise

< 100 µV 150 Hz – 15 kHz, > – 110 dB

Input Sensitivity

0,8 V RCA; 1,6 V XLR

Input Resistance

220 kOhm RCA; 20 kOhm XLR

CMRR of the XLR-Input

> 85dB / 1 kHz

Minimal Load Impedance

2 Ohm

Gain

+28dB – RCA

Eco Mode Trigger Level

0,5 mV

Inputs

1 x RCA, 1 x XLR

Outputs

1 x Speaker terminal for 4 mm Banana connectors and spades

Features

ECO Mode, Bias Adjustment, Power Management

Download:

Owner’s Manual


	General Facts

	Power Consumption		< 20 W in Ecomode, 180 W idle, 550 W at full power

	Standard Accessory		Power Cord, 3 mm Screwdriver for BIAS Adjustment

	Weight		27,6 kg

	Dimensions (in mm)

Features

Black Box Connector

OCTAVE, with the Black Box technology, offers an upgrade path for optimizing the OCTAVE amplifier in respect to the speaker. This flexibility is a unique feature of the OCTAVE brand.

The dynamic and tonal stability of an amplifier is strongly dependent upon the stability and capacity of the power supply, therefore the Black Box and Super Black Box were developed as external upgrades to the OCTAVE amplifiers’ power supply storage capacitors by increasing their capacitance by a factor of 4 (Black Box) or 10 (Super Black Box), respectively. This is a tremendous benefit if the speaker is difficult to drive. Loudspeaker efficiency is made less critical, while the amplifier is enabled to handle speakers with extremely low minimum impedances.

BIAS Adjustment

The Output stage of the RE 320 operates in Class A/B, and therefore requires an adjustable BIAS regulation. The highly sophisticated yet extremely simple yet accurate BIAS calibration system is accessed on the front panel of the unit. It utilizes external precision bias trim pots and LED confirmation, allowing the user to readily monitor the output tubes and simply correct their bias individually at the top panel – without the need of a micrometer let alone any special knowledge or tools.

The correct BIAS is vital for the constant sound quality of the RE 320. Due to this facility there is no need for a technician to service the RE 320 for changing or tubes or to check their condition. The precision of this user friendly system is within 0.5% accuracy.

Power Management and Protection System

The RE 320 is equipped with a multi-stage Soft-Start/Turn-On protection circuit which extends component as well as tube life considerably by protecting against stress caused by typical high inrush currents during switch-on. The unit starts in a defined sequence, with the Protection System monitoring the RE 320 completely, and activated whenever a malfunction is detected. Once the Protection is activated, the RE 320 is powered down.

Power Bandwidth:

Power bandwidth of both positions of the power selector. The maximum output power of 130 W in position “high” and 75 W in position “Low” is constant in the range from 25 Hz up to 30 kHz.

^ top

Thêm vào giỏ hàng

Liên hệ

Octave RE 290
Liên hệ

Power Octave RE 290 sản xuất tại Đức.

Giá usd tham khảo: $9000
Giá ưu đãi Khách hàng và đại lý: 0983 99 5674

#Octave #Âmlyđèn #Power

Thêm vào giỏ hàng

14,500 ₫

Octave HP 700

14,500 ₫

Technische Daten

Ein- und Ausgänge

Eingänge

3 x Cinch, 2 x XLR, 2 x frei wählbar
1 x Bypass RCA (schaltbar auf IN4 -XLR)

Ausgänge

2 x Cinch, 1 x XLR, 1 x Monitor / Tape Record (Cinch)

Übersetzungsverhältnis XLR

0 dB

Pinbelegung XLR

1 = Masse, 2 = Plus, 3 = Minus

Hochpegel – Line – stufe

Ausgangswiderstand

100 / 300 Ohm Cinch; 150 Ohm XLR

Ausgangswiderstand Monitor Out

240 Ohm

Maximale Ausgangsspannung

12V

Verstärkungsfaktor Gain High

25 dB = 18,5

Verstärkungsfaktor Gain Med

18 dB = 7,8

Verstärkungsfaktor Gain Low

12 dB = 4

Fremdspannungsabstand Gain High

– 98 dB / 38 µV bezogen auf 3 V Ausgangsspannung

Fremdspannungsabstand Gain Med

– 104 dB / 18µV bezogen auf 3 V Ausgangsspannung

Fremdspannungsabstand Gain Low

– 110 dB / 8 µV bezogen auf 3 V Ausgangsspannung

Aquivalenter Rauschpegel

14 nV √Hz

Frequenzbereich Gain High-Cinch

10 Hz – 200 kHz -0,7 dB, 0,7 Mhz -6 dB

Frequenzbereich Gain Med-Cinch

10 Hz – 200 kHz -0,3 dB, 1.3 MHz -6 dB

Frequenzbereich Gain Low-Cinch

10 Hz – 200 kHz -0,2 dB, 2,1 MHz -6 dB

Frequenzbereich XLR

10 Hz – 200 kHz -1,5 dB

Anstiegszeit Gain Low

250 n sek.

Anstiegsgeschwindigkeit Gain Low

60 V/µ sek.

Klirrfaktor, Gain Low, Med, High

0.01% bei 3V an 10 kOhm

Kanaltrennung

-90 dB / 1 kHz, Eingang kurzgeschlossen

Übersprechen Eingang zu Eingang

– 80 dB / RCA, -95 dB XLR / 1kHz

Eingangswiderstand

50 kOhm

Kanalgleichheit über Lautstärkeregler

0,5 dB – 70 dB

Phono

Toleranz RIAA-Entzerrung

0,3 dB / 15 Hz – 20 kHz

Eckfrequenz Subsonicfilter

15 Hz / – 3 dB

Fremdspannungsabstand (bewertet)

– 75 / – 84 dB / mit IN 2 MC Eingang

Eingangsempfindlichkeit

250 µV / 600 µV / mit IN 2 MC Eingang

Eingangsempfindlichkeit, Gain und Eingangswiderstand vom Eingangsmodul abhängig

Verstärkung MC Gain Low – Pre Out

Gain Low: 70 dB, Med: 77 dB, High: 83 dB

Verstärkung MC Gain High- Pre Out

Gain Low: 79 dB, Med: 86 dB, High: 92 dB

Download:

Bedienungsanleitungen


	Allgemeine Daten

	Leistungsaufnahme		35 – 60 W

	Gewicht Vorstufe		10 kg

	Gewicht Netzteil		3,8 kg

	Mitgeliefertes Zubehör		Netzkabel, Fernbedienungssender

	Abmessungen Vorstufe (über alles)		462 x 130 x 480 mm (B x H x T)

	Abmessungen Netzteil (über alles)		110 x 90 x 277 mm (B x H x T)

	Geräteabmessungen (in mm)

Features

Der HP 700 ist serienmäßig mit zwei Cinch- und XLR-Ausgängen ausgestattet.

Der XLR-Ausgang ist trafosymmetriert und galvanisch getrennt

Soft-Start für Heizung, Betriebsspannung und Signalausgang; dadurch maximale Lebensdauer der Röhren und störungsfreie Ein- und Ausschaltvorgänge.

Die Verstärkung der Hochpegelstufe ist in drei Stufen schaltbar.

Externes Netzteil mit mehrfach geschirmtem Netztrafo und integriertem Netzfilter

Frequenzgang:

Frequenzgang und Verstärkung Line-Stufe in Stellung gain low (12dB), med (18dB) und high (25.5dB).

Brumm – und Rauschpegel der Line Stufe:

Auch bei der Messung des Rauschpegels sind keine Netzeinflüsse sichtbar, der Rauschpegel sinkt linear um jeweils 6dB mit der Einstellung der Verstärkung.

FFT-Spektrum:

Gegenüberstellung des Störspektrums RCA und XLR. Netzeinflüsse sind bei beiden Ausgängen nicht vorhanden, Das Spektrum der Oberwellen K2, K3, K4, K5, K6 fällt bei beiden Ausgängen gleichmäßig linear ab.

Frequenzgang Phono mit und ohne Subsonicfilter:

Der Frequenzbereich ohne Subsonic-Filter ist sehr linear und außergewöhnlich tiefreichend (Kurve rot). Mit Subsonic-Filter (Kurve magenta) findet durch die tiefe Eckfrequenz (-3 dB bei 15 Hz) keine Limitierung der Basswiedergabe statt.

Regelcharakteristik des Klangreglers:

Der Regelbereich umfasst den Bereich zwischen der roten und der blauen Kurve. Die präzis einstellbaren Regler erlauben anhand der Skalierung Einstellungen im 1dB Bereich. Ein Teilstrich entspricht 4 dB Anhebung, bzw. Absenkung.

Regelbereich und Frequenzgang Balanceregler:

Der kompensierte Balance – Vorregler zeigt bei allen Einstellungen praktisch den gleichen Frequenzgang.

Thêm vào giỏ hàng

Octave V40SE Line

Octave V70SE Line

Octave V110SE Line

Octave V80SE Line

HP 300 SE

Octave HP 500 SE

Octave RE 320

Octave RE 290

Octave HP 700

CÁCH THỨC THANH TOÁN

DỊCH VỤ GIAO HÀNG

CHỨNG NHẬN